Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 294: Port Audit and Update Test (#36) 2 of 4
Error
Code
Test
Result
Description / Recommendation
1004 ABORT ALARM-PT: The port received an EXT-DEV failure during the test. The
test has been aborted.
1. Enter test external-device-alarm port location to
determine whether the port is reporting an EXT-DEV failure.
2. If the port has no EXT-DEV failures, retry the command at
1-minute intervals up to 5 times
All other Maintenance Objects: The port was seized by a valid call
during the test.
1. Enter display port location to determine the station
extension or trunk group/member number of the port.
2. Enter status station or status trunk to determine the
service state of the port. If the port is active, wait until it is idle.
3. Retry the command at 1-minute intervals up to 5 times.
4. If the test continues to abort and the port is not in use, escalate the
problem.
1005 ABORT This test is not applicable for this type of port. Ignore this error.
1132 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 4