Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Sanity Handshake Test (#106)
This test checks the ability of a PN’s Maintenance circuit pack’s to respond to queries. A
message is sent to the PN’s Maintenance circuit pack. The test passes if a valid cabinet type is
returned. This test runs on MAINT (PN Maintenance Circuit Pack).
Table 323: Sanity Handshake Test (#106) 1 of 2
Error
Code
Test
Result
Description / Recommendation
ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
1000 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2000 ABORT Response to query was not received in the allowed time.
1. Retry the command at 1-minute intervals up to 5 times.
2033 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
2046 ABORT The PN’s Maintenance circuit pack reported an invalid cabinet type,
which will prevent all PN environment maintenance from running.
1. Retry the command.
2. If the test continues to abort with 2046, either the PN’s
Maintenance circuit pack is defective or the PN cabinet’s wiring
is defective. First, replace the Maintenance circuit pack, then
retest.
3. If the test continues to abort with 2046, the PN cabinet’s wiring
is defective in the A carrier. The PN’s Maintenance circuit pack
cot read the backplane pins to determine the cabinet type.
10601 ABORT Test disabled via software patch.
1202 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2