Demand test descriptions and error codes - Avaya Support

PE Interchange Priority Mismatch Alarm
_PE 4 Minor alarm: PE Priority configuration mismatch between servers
_PE (Processor Ethernet) Alarms
Resolution:
1. On the Status Summary screen of System Management Interface, verify that the PE
Interchange Priority setting on the active server is the same as the PE Interchange Priority
setting on the standby server.
2. On the Configure Interface screen of System Management Interface (that displays the
incorrect value) change the incorrect value of the PE Interchange Priority setting.
Note: Make
MO name in log Alarm level Alarm text Description
_PE 4 MIN None The PE
Interchange Priority
setting on the
Configure
Interfaces page of
the System
Management
Interface of one of
the servers of a
duplicated pair of
server does not
match the PE
Interchange Priority
setting on the
Configure
Interfaces page of
the System
Management
Interface of the
other server.
Note:
sure that the server on which you are changing the settings on the
Configure Interface screen is on the standby server.
Issue 5 May 2009 707