Demand test descriptions and error codes - Avaya Support

CONFIG (System Configuration)
’1’ to the Aux Data value. For example, if the Aux Data value is ’0’, the port network
number is 1. If the Aux Data value is ’29’, the port network number is 30.
The Error Type field specifies the carrier and slot location of the circuit pack that caused
the error as indicated in Table 78: Converting Error Types To Carrier Locations. If the
Error Type is greater than 1000, subtract 1000 from the Error Type field before consulting
the table.
S8700 Fiber-PNC:Before proceeding, if multiple CONFIG errors are simultaneously logged
with an Aux Data of 1, investigate any EXP-INTF (Expansion Interface Circuit Pack) errors.
Once the port’s circuit-pack location has been determined, use list configuration
all to determine whether the circuit pack is inserted. If the circuit pack has already been
inserted but the error persists, replace the circuit pack. If not, insert the pack.
Table 78: Converting Error Types To Carrier Locations 1 of 5
Error Type Carrier Location
1 (a)
2 E01
3 E02
4 E03
5 E04
6 E05
7 E06
8 E07
9 E08
10 E09
11 E10
12 E11
13 E12
14 E13
15 E14
16 E15
17 E16
18 E17
1 of 5
Issue 5 May 2009 291