Demand test descriptions and error codes - Avaya Support

EXT-DEV ADMIN? Y (External Device Alarm)
S8700 series / S8500
Note: Use
EXT-DEV ADMIN? Y (External Device Alarm)
Note:
this MO when the External Device Alarm Admin field on the change
system-parameters customer-options screen is y. You must have INADS
or INIT login permissions to administer EXT-DEV Alarm.
S8700 series / S8500
Each PN’s Maintenance circuit pack has two alarm ports that connect to such external devices
as uninterruptible power supplies (UPSs) or adjuncts (e.g., AUDIX).
Certain conditions on the external device close the contacts on the alarm leads to notify the
switch that in turn originates an EXT-DEV alarm. One set of leads generates a major alarm; the
other set generates a minor alarm.
The special locations UUmajor and UUminor designate the major or minor Maintenance
board’s alarm connection for cabinet UU. The major/minor designation specifies the port, not
the alarm level associated with the connection; for example, the “major” port can be
administered as a major, minor, or warning alarm, and the “minor” port can be administered as a
major, minor, or warning alarm. In addition Analog line ports can also be administered as
external device alarms.
Note: An
MO Name in
Log
Alarm
Level
EXT-DEV MAJ
MIN
WRN
Initial Command to Run 1
1. UU is a cabinet number determined in the Port field of the Alarm or Error Log.
Full Name of MO
test eda-external-device-alrm UU External Device Alarm
Note:
un-administered Maintenance board’s external device alarm port, that is
sensing a contact closure will have an entry in the Error Log and in the Alarm Log.
The alarm receiver will not receive warning alarms.
Issue 5 May 2009 459