Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 438: FIBER-LK Configuration Audit (#759) 9 of 10
Error
Code
Test
Result
Description / Recommendation
238 FAIL The physical location of SNI Endpoint 2’s neighbor does not match its
administered location.
1. Enter list fiber-link to see a fiber link’s endpoints. One
location (carrier and slot) is assigned for the endpoint’s neighbor, but
it physically resides in another location.
2. Enter list fiber-link and verify that the fiber-optic and metallic
cables are installed as administered.
3. If the problem does not seem to be caused by either a
physical-connection or an administration problem, replace the
neighbor circuit pack. The neighbor circuit pack may have a
hardware problem causing it to report a wrong Angel address
(physical carrier/slot address) to software.
239 FAIL The SNI Endpoint 2 is assigned to be connected to a DS1 converter, but is
not physically connected to one.
1. Enter list fiber-link to see a fiber link’s endpoints.
If this SNI endpoint should be connected to a DS1 converter:
1. Enter list fiber-link to verify that the fiber-optic cable and/or
metallic cable connections are installed as assigned.
If not, change administration to remove the DS1 converter complex from
the SNI’s fiber link:
1. Enter list fiber-link to locate this SNI endpoint’s fiber
2. Enter remove fiber-link for this SNI endpoint’s fiber
3. Enter add fiber-link to replace the fiber without assigning the
DS1 converter complex.
1468 Maintenance Alarms for Communication Manager, Media Gateways and Servers
9 of 10