Demand test descriptions and error codes - Avaya Support

c. Error Type 1281: the Conference Circuit test (#7) failed on this port. See Test #7 for repair
procedures.
d. Error Type 1537: the NPE Crosstalk test (#6) failed on this port. See Test #6 for repair
procedures.
e. Error Type 1793: the TN464C UDS1 Interface circuit pack or the DS1 Interface Media
Module has failed. See UDS1-BD (UDS1 Interface Circuit Pack) or MG-DS1 (DS1 Interface
Media Module).
f. Error Type 3840: the Port Audit and Update test (#36) failed due to an internal system
error. Enter status access-endpoint extension and verify the status of the port. If
the wideband access endpoint port is out of service, enter release access-endpoint
extension to put it back into service. Retry the test command.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
1064 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Long Test
Sequence
NPE Crosstalk Test (#6) X ND
Conference Circuit Test (#7) X ND
Port Audit And Update Test (#36) X X ND
1. D = Destructive; ND = Nondestructive
D/ND 1