Demand test descriptions and error codes - Avaya Support

S8400-BD (S8400 Server)
S8400
MO Name in Log Alarm
Level
S8400-BD (S8400 Server)
The S8400 Server is a Linux-based server that occupies a single slot in a standard TN carrier.
The S8400 Server provides Communication Manager processing functionality in stand alone,
single port network (PN), telephony systems requiring up to 500 stations.
The S8400 Server is comprised of the:
● TN8400AP Server circuit pack
● TN8412AP S8400 IP Interface (SIPI) circuit pack
Initial Command to Run Full Name of MO
S8400-BD WRN None S8400 Server
Error log entries and recommended actions
Table 253: S8400-BD Error Log Entries
Error
Type
Aux
Data
Associated
Test
1 (a) Serial Link Test
#1647
513 (b) 4352
4353
4355
4356
4358
Alarm
Level
On/Off
Board
Recommended Action
WRN ON test board location
WRN ON
1537 (c)
3841 (d)
WRN ON
Notes:
a. Error Type 1: Serial Link Test failure. Either the main server is down or the network is down.
b. Error Type 513: transient hardware device problems on the board. They include an
external RAM failure, internal RAM failure, ROM checksum failure, message corruption,
and program logic inconsistency. If the board detects only one of these hardware problems
it may be alarmed. The error will disappear when none of these faults are detected for 10
minutes. There are no associated tests for these inline errors; if they continue to happen,
the circuit pack should be replaced.
Issue 5 May 2009 935