Demand test descriptions and error codes - Avaya Support

Table 126: Aux Data for Error Type 259 3 of 3
Aux Data Description of Failure
30 Download sequence error – firmware error on target board.
32 The file name is too long – firmware error on target board.
FW-DWNLD (Firmware Download)
40 FLASH programming failed – Internal firmware error on target board.
1. Retry the download, and escalate if it still fails.
d. Error Type 513 — the schedule has failed. A schedule failure can result from:
● Any of the previously mentioned log-only errors (257 – 259)
● An expiration of the schedule timer
● An execution of disable firmware download command
To resolve the error and clear the alarm, use the test firmware download command.
The Aux Data specifies the reason why the schedule failed. See Table 127: Error Type
513 Aux Data for more details.
Table 127: Error Type 513 Aux Data
Aux Data Description of Failure
1 Software resources not available; see Error Type 257 (a).
2 Source board-related failure; see Error Type 258 (b).
3 A target board failed. See Error Type 259 (c).
1. Check the image, translations and retry the download
4 Two consecutive target boards failed, download schedule aborted.
1. Verify the download image and translations.
2. Retry the download
5 Schedule timer expired
1. Schedule unfinished target boards.
2. Retry the download.
6 disable firmware download command was executed.
3 of 3
e. Error Type769 — a downloadable board image is bad and a good image needs to be
downloaded. This error may be a result of a failed download attempt or a board that is
unstable. The Aux Data indicates the location of the circuit pack requesting the firmware
Issue 5 May 2009 477