Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 289: Local Loop Test (#13) 8 of 9
Error
Code
Test
Result
Description / Recommendation
15 FAIL The control chel between the processor and the circuit pack is not
transmitting properly.
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator or Tone
Detector circuit pack.
3. If both circuit packs are functioning properly and the test still fails,
ADX8D-PT and ADX16D-P: Shut down AUDIX and replace
the EMBEDDED AUDIX circuit pack.
DIG-LINE, E-DIG-ST, PDMODULE, and TDMODULE:
Replace the Digital Line circuit pack.
16 FAIL The secondary information chel is not transmitting properly.
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator or Tone
Detector circuit pack.
3. If the Tone Generator and the Tone Detector circuit packs are
functioning properly and the test still fails,
ADX8D-PT and ADX16D-P: Shut down AUDIX and replace
the EMBEDDED AUDIX circuit pack.
DIG-LINE, E-DIG-ST, PDMODULE, and TDMODULE:
Replace the Digital Line circuit pack.
None FAIL ADX8D-PT and ADX16D-P: The test failed for reasons external to the
EMBEDDED AUDIX circuit pack.
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator or Tone
Detector circuit pack.
3. If both circuit packs are functioning properly and the test still fails,
shut down AUDIX and replace the EMBEDDED AUDIX circuit
pack.
1114 Maintenance Alarms for Communication Manager, Media Gateways and Servers
8 of 9