Demand test descriptions and error codes - Avaya Support

BRI-BD (ISDN-BRI Line Circuit Pack)
m. Error Types 4096, 4097, 4098, 4099, 4100, 4101: the circuit pack received a bad control
chel message from the switch. Not service-affecting, no action is required. The auxiliary
data identifies the error events.
Error Type 4096: Bad major heading
Error Type 4097: Bad port number
Error Type 4098: Bad data
Error Type 4099: Bad sub-qualifier
Error Type 4100: State inconsistency
Error Type 4101: Inconsistent downlink message
n. Error Type 3843: bad translation RAM detected, but call continues by using another
translation location. This error is not service-affecting. No action is required.
o. Error Type 3999: the circuit pack sent a large number of control chel messages to the
switch in a short period of time.
If Error Type 1538 is also present, the circuit pack was taken out-of-service due to
hyperactivity.
If Error Type 1538 absent, the circuit pack was not taken out-of-service, but has generated
50% of the messages necessary to be considered hyperactive. This may be normal during
heavy traffic periods. If traffic is light, it may indicate a problem with the circuit pack or the
equipment attached to it.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Long Test
Sequence
D/ND 1
Control Chel Looparound Test (#52) X X ND
NPE Audit Test (#50) X ND
LANBIC Receive Parity Error Counter Test (#595) X ND
1. D = Destructive; ND = Nondestructive
Issue 5 May 2009 213