Demand test descriptions and error codes - Avaya Support

Table 535: Echo Canceller Test (#1420)
Error
Code
Test
Result
Description / Recommendation
Echo Canceller Test (#1420)
1015 ABORT The board is not busied out.
1. If the board is not in use, enter busyout board location
2. Retry the test.
2000 ABORT Response to the test was not received within the allowed time. This may
be due to hyperactivity.
1. Enter display errors on the SAT.
2. If Error Type 1538 appears in the error log for this board, see
Hyperactive DS1/UDS1 Interface Circuit Pack/Media Module for the
repair procedures. Otherwise, retry the test at 1-minute intervals up
to 5 times.
2012
2100
2500
1400
1401
ABORT Internal system error.
Could not allocate the necessary system resources to run this test.
Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
FAIL The Echo Canceller test failed. Echo Cancellation is no longer being
supplied by the board.
● Error 1400 - Echo canceller function test failed.
● Error 1401 - Echo canceller memory test failed.
Clear the alarm using test board location long. If the test still
fails, replace the board. The board can still be used for a T1/E1 line
interface without echo cancellation. This capability provides limited service
for the customer until the board can be changed out.
PASS The Echo Cancellation feature is functioning properly.
1. Enter release board location to put the board back in
service.
0 NO
BOARD
See NO BOARD for the repair procedures.
Issue 5 May 2009 1673