Demand test descriptions and error codes - Avaya Support

Table 185: MG-DS1 Error Log Entries 3 of 3
Error Type Aux
Data
1795 Any Blue Alarm
Inquiry (#139)
2049 Any Red Alarm
Inquiry (#140)
2305 Any Yellow Alarm
Inquiry (#141)
2306 Any Yellow Alarm
Inquiry (#141)
2561 Any Major Alarm
Inquiry (#142)
2817 Minor Alarm
Inquiry (#143)
3073 to
3160 (o)
3585 to
3601 (p)
3840 (q) Any
3841 (r) 4358
3842 (s) 46097
3999 (t) Any
Associated Test Alarm
Level
Any Slip Alarm Inquiry
(#144)
Any Misframe Alarm
Inquiry Test
(#145)
MAJ
MIN
WRN
On/Off
Board
Recommended Action
OFF test board location
MIN OFF test board location
1
WRN
MIN OFF test board location
1 WRN
MIN OFF test board location
WRN1 MIN OFF test board location
1
WRN
MIN OFF test board location
WRN1 MIN OFF test board location r 6
1
WRN
MIN OFF test board location r 6
1 WRN
1. If ports are assigned to the Media Module, then a minor alarm is raised. If no ports are assigned to the
Media Module, then a warning alarm is raised. The alarm is raised after the Media Module has been
missing for a period of 15 minutes. Warning alarms are also raised against any ports administered on the
Media Module.
2. Major alarms on this MO may be downgraded to minor or warning alarms, and minor alarms on
this MO may be downgraded to warning alarms based on values set in set options.
Notes:
a. Error Type 0: run the short test sequence first. If all tests pass, run the long test sequence.
Refer to the appropriate test description and follow the recommended procedures.
b. Error Type 1: the Media Module has totally stopped functioning or is not fully administered.
The alarm is logged about 15 minutes after the Media Module has been removed or
11-minutes after the SAKI Test (#53) fails. To be fully administered, a Media Module must
meet all three of the following conditions:
● Have an entry in the circuit plan using the change media module command
640 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 3