Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 491: Trunk-side Layer 1 Query Test (#1242) 1 of 3
Error
Code
Test
Result
Description / Recommendation
1187 ABORT The board or port may be busied out.
1. Look in the Error Log for Error Type 18 (port busied out) for this port
and TBRI-BD (board busied out). If this Error Type is present for
TBRI-PT only, release the port with
release port location and run the test again.
CAUTION: When
If the error is present for both TBRI-BD and TBRI-PT, release the
board with release board location and run the test again.
! CAUTION:
you release a board, you release every port
associated with it. If certain ports still need to be busied
out, use busyout port location to busy them out.
2. Make sure the endpoint is connected.
3. Retry the command at 1-minute intervals up to 5 times.
2000 ABORT Response to the test was not received within the allowed time.
1. Retry the command at 1-minute intervals up to 5 times. If the test
aborts repeatedly up to 5 times, reset the circuit pack.
2. Rerun the test. If the test aborts again with this error code, replace
the circuit pack.
1600 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 3