Demand test descriptions and error codes - Avaya Support

Table 292: Looparound and Conference Test (#33) 4 of 4
Error
Code
Port Diagnostic Test (#35)
Port Diagnostic Test (#35)
This test is also known as the Battery Feed Test.
The battery feed chip provides power to the telephone equipment, signaling, rotary dial pulsing,
transmission, and balance. This test checks the signaling and switch hook capabilities of the
battery feed chip by terminating the port, applying battery, and trying to detect a current.
This test is run on the following maintenance objects:
● ADX16A-P (AUDIX Analog Line/Control Link)
.
Test
Result
● ALARM-PT (Alarm Port)
Description / Recommendation
PASS This port is functioning properly. If users are reporting troubles, examine
the loop connections to the port.
● AN-LN-PT (Analog Line Port)
● ANL-16-L (16-Port Analog Line)
● ANL-LINE (8-Port Analog Line)
● DID-TRK (Direct Inward Dial Trunk)
● MET-LINE (MET Line)
● RANL-STA (Remote Analog Line (Station) Port)
Table 293: Port Diagnostic Test (#35) 1 of 6
Error
Code
Test
Result
Description / Recommendation
ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
4 of 4
1 of 6
Issue 5 May 2009 1125