Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 443: Packet Neighbor Link Test (#767) 3 of 5
Error
Code
102 -
109,
113 -
120
Test
Result
Description / Recommendation
FAIL The SNI circuit pack cot communicate with the SNI in a different slot over
the packet path.
1. Determine the slot number of the other SNI: Subtract 100 from the
Error Code. For example, if the Error Code is 115, the SNI slot
number is 15. This number is referred to as the "specified SNI slot".
2. Fix any on-board SNI-BD errors against this SNI and the SNI in the
specified SNI slot. Enter display errors to find any SNI-BD
errors, and enter display alarms to determine whether the errors
have on-board alarms. Follow the repair procedures for SNI-BD (SNI
Circuit Pack).
3. Enter display errors to check the error log for other SNI circuit
packs with SNI-PEER errors. See Table 435: SNI Slot / Error Type
to determine the Error Type for SNI-PEER. For example, if the
specified SNI slot number is 13, look for SNI-PEER errors with Error
Type 2049. If other SNI circuit packs have SNI-PEER errors of this
Error Type, replace the SNI in the specified SNI slot. Replacing an
SNI may be service interrupting. See SNI-BD (SNI Circuit Pack) for
the procedure for replacing an SNI.
4. If other SNI circuit packs do not have SNI-PEER errors of this Error
Type, the problem could be at either of the peer SNI boards. It is
arbitrary as to which SNI is replaced first.
a. Replace the SNI being tested.
b. Replace the SNI in the specified SNI slot.
1486 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 5