Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
ATM-EI-Related Commands
The following commands can be helpful in resolving ATM-EI problems:
Replacing an ATM-EI Circuit Pack
Standard Reliability
1. Enter busyout atm pn# (this is service-affecting) on the SAT.
2. Replace the ATM PNC circuit pack, and reconnect the fiber.
3. Enter release atm pnc.
4. Wait 2½ minutes for board insertion.
5. Enter list sys-link to verify that the links are up.
6. Enter test board location, and verify that every test passes.
Duplex or High Reliability
There is 1 ATM-EI circuit pack in each PN.
1. Enter busyout atm pnc # on the SAT.
Note: If
add atm pnc list measurements atm
busyout/release atm pnc remove atm pnc
busyout/release board reset board
change atm pnc (pnc duplication) status atm pnc
display atm pnc status cabinet
list atm oam-statistics status port-network
list atm pnc test board
2.
Note:
the ATM-EI is in a PN, this is service-affecting.
Replace the circuit pack.
3. Enter release atm pnc.
4. Wait 2½ minutes for board insertion.
5. Enter list sys-link to verify that the links are up.
126 Maintenance Alarms for Communication Manager, Media Gateways and Servers