Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
AXA12-RS (AUDIX Reserve Slots)
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
AXA12-RS NONE NONE TN568 12-port analog
reserve slot
ADX8D-RS NONE NONE TN568 8-port digital
reserve slot
AXD12-RS NONE NONE TN568 12-port digital
reserve slot
There are no tests associated with these MOs. Both test board and busyout board abort
when either is attempted on a reserved slot. An error message indicates that the slot is
associated with the circuit pack that the TN568 is emulating, but the requested operation is not
valid. If there are errors logged against these MOs, see XXX-BD (Common Port Circuit Pack/
Media Module).
The TN568 circuit pack connects to the switch through a single slot in the backplane. However,
the number of slots physically occupied by the circuit pack is supplied by the board when
inserted. The TN568 is 2 slots wide: the functional slot and a reserve slot. The reserve (blank)
slot to the left of the functional slot is a place holder on the switch and has no interaction with
the switch.
These MOs are place holders for the extra slot needed for the EMBEDDED AUDIX board. Each
instance of these MOs represents a reserve slot associated with the respective circuit pack
mode in which the TN568 (EMBEDDED AUDIX) is working. They are used for EMBEDDED
AUDIX and emulation of respective port types.
206 Maintenance Alarms for Communication Manager, Media Gateways and Servers