Demand test descriptions and error codes - Avaya Support

LIC-ERR (License Error Mode)
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
LIC-ERR MAJ test license License Error Mode
The LIC-ERR MO works with the NO-LIC MO to look for any errors and violations associated
with a License File. Once a License File error occurs, a LIC-ERR error is logged, an alarm is
raised, and the following SAT login message is displayed:
“System Administration Will Be Blocked in Approximately XXX hours.
Contact Your Service Representative.”
The License File is loaded onto a server during initialization of Communication Manager
software, restoration of translations, and periodically during normal operation. After initialization,
a query is made to WebLM, a license server plug-in that
● Reads the serial number in a License file.
● Compares this file’s serial number to a serial number in hardware.
● Compares the file’s serial number with a running software version.
If a match occurs, the Web License Generator (WebLM) that resides on a designated server in
the enterprise delivers a new feature mask, an information set that controls which features are
enabled or not on the Customer Options and Special Applications screens.
Entry into License Error mode starts a timer that, when expired, causes the system to enter
No-License mode (see Figure 36: License mode algorithm).
572 Maintenance Alarms for Communication Manager, Media Gateways and Servers