Demand test descriptions and error codes - Avaya Support

Audits
As part of periodic maintenance, the hardware status audit test queries programmable
terminals to determine what levels and/or options are being used. If the reported values
are not equal to the administered values, the system will initiate a terminal download
action. This audit does NOT check the parameters used for softkeys.
Activation of TTI
Note: Plugging
A terminal is downloaded automatically when it is activated using the Terminal Translation
Initialization feature. Therefore, no special user actions are required for TTI.
Note:
the station cord into a terminal does not automatically cause the
terminal to be downloaded. If this terminal has factory defaults or if the terminal
has been previously downloaded with parameters different from those desired,
use one of the following demand download actions to download the terminal.
Demand Download Actions
Busyout/Release Command
A maintenance demand busyout/release request for a station causes the terminal to be
downloaded regardless of its previous download status.
Feature Access Code
Note: For
A Refresh Terminal Parameters Feature Access Code can be used to request a terminal
download action. When this code is followed by a pound sign (#), the programmable
parameters for the current terminal are downloaded when the terminal goes on-hook.
When this code is followed by an extension, the programmable parameters for the
specified station are downloaded.
Assign the Refresh Terminal Parameters Feature Access Code on the Feature Access
Codes form.
A confirmation is returned if the download request is accepted. A busy tone is returned if
the request is made from a different station when the target station is off-hook.
Note:
systems supporting circuit packs, the first three green call appearance LEDs
on the 84xx 603x terminal will be turned on for three seconds if the station was
successfully downloaded as a result of an entry of a Refresh Terminal
Parameters Facility Access Code. This is not true for the 302B1 terminal.
There is no visible display on a station for the other background or demand download
actions. Use status station and status attendant forms to check the download
status of a specified terminal.
324 Maintenance Alarms for Communication Manager, Media Gateways and Servers