Demand test descriptions and error codes - Avaya Support

Table 399: Packet Bus Port Health Inquiry Test (#567) 2 of 2
Maintenance/Test Circuit Pack Query Test (#572)
Maintenance/Test Circuit Pack Query Test (#572)
This test queries the Maintenance/Test packet bus port about the state of health of the packet
bus. If the packet bus has faults, the test fails. The failure code describes the severity, type, and
number of faults. The test passes if the packet bus is fault-free.
This test is run on PKT-BUS (Packet Bus).
Note: A
Error
Code
Test
Result
Description / Recommendation
2059 FAIL The M/T-PKT has reported a failure of the on-board self-test.
2060 The M/T-PKT has reported an invalid state for the packet bus.
2061 Communication Manager cot communicate with the M/T-PKT, but can
communicate with the Maintenance/Test circuit pack.
1. Retry the command.
2. If the test continues to fail, replace the Maintenance/Test circuit
pack, and retry the command.
3. If the test continues to fail, see PKT-BUS (Packet Bus) or PKT-INT
(Packet Interface) to determine whether the M/T-PKT failure is
being caused by a packet bus fault.
PASS The M/T-PKT packet bus fault-detection capability is operating correctly.
Note:
Maintenance/Test circuit pack is usually absent from the port networks of a
standard-, duplex-, or high-reliability system. However, customers may optionally
install a Maintenance/Test circuit pack to both utilize its enhanced analog-trunk
and digital-line testing capabilities and to enhance the system’s ability to quickly
recognize a packet bus failure.
2 of 2
Issue 5 May 2009 1369