Demand test descriptions and error codes - Avaya Support

PKT-INT (Packet Interface)
For a case where not every link appears in the Failed Links category, examine the alarm
and error logs for failures of the following circuit packs, and follow the repair procedures for
those circuit packs before considering replacing the associated IPSI circuit pack:
● S8700-series Fiber-PNC: TN570 Expansion Interface circuit pack (EXP-INTF)
● S8700-series Fiber-PNC: TN573 Switch Node Interface circuit pack (SNI-BD)
● S8700-series Fiber-PNC: TN572 Switch Node Clock circuit pack (SNC-BD)
● S8700-series Fiber-PNC: TN2305, TN2306 ATM
● ISDN-BRI Line circuit packs, ports, and stations (BRI-BD, BRI-PORT, BRI-SET)
● Universal DS1 circuit packs and ports (UDS1-BD, TIE-DS1)
● TN464, TN2207, TN2464 Universal DS1 circuit pack — ISDN-PRI service
● TN556, TN2198, TN2185 ISDN-BRI Line circuit pack — ISDN-BRI service
● TN799DP Control LAN (C-LAN) circuit pack
● TN2501 Voice Announcements over the LAN (VAL)
● TN2602 IP Media Processor (IPMEDPRO)
Use test sys-link with the faulted path option to test all components in the faulted link.
Error log entries and recommended actions
Table 209: PKT-INT Error Log Entries 1 of 2
Error Type Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended Action
0 (a) 0 Any Any ON test packet-interface location l r
2
1 (b) Any WAR
NING
10 (c) 0
50 (d) 0
OFF reset packet-interface location 1
257 (e) Any MIN OFF reset packet-interface location
513 (f) Any MAJ ON reset packet-interface location
769
770 (g)
Any Maintenance
Looparound
test (#886)
MAJ ON test packet-interface location r 2
1 of 2
Issue 5 May 2009 737