Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 21: -BD Error Log Entries 2 of 2
Error
Type
513 (i) Any None
1025 (j) 4363 NPE Audit Test (#50) test board location l
1281 (k) 17699 None
1538 (l) Any None MIN ON
1793 Angel SP Handshake (#208) MIN ON test board location l r 3
2049
(m) (n)
17680 inline Error
Clock Match Inquiry (#212) MIN ON test board location r 3
17674 inline Error
2305 140AY Looparound (#210) MIN ON test board location r 3
2561 Super Frame Match Inquiry (211) MIN ON test board location r 3
2817
(m)
Aux
Data
17676 inline Error
Announcement Checksum (#209) MIN ON test board location r 3
17682 inline Error
17699 inline Error
3840 (j) Any None
3999 (o) Any None
Associated test Alarm
Level (See
WRN
message)
On/off
Board
WARNING: All -BD alarms are upgraded to MAJOR when the BASE Tone Generator is set to
12 (France).
Notes:
a. Error Type 0: Run the short test sequence first. If all tests pass, run the long test sequence.
Refer to the appropriate test description and follow the recommended procedures.
b. Error Type 1: the circuit pack totally stopped functioning or it was physically removed from
the system.
If the circuit pack is not in the system, insert a circuit pack in the same slot as the error
indicates to resolve this error. Or, if the circuit pack is in the system and the red LED is on,
follow the instructions for Red (alarm) in the Circuit Pack LEDs section of LED
Descriptions for Avaya Aura Communication Manager Hardware Components
(03-602804).
92 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Recommended action
2 of 2