Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
● SNI-PEER (SNI Peer Link)
Table 436: SNI Destructive Facility Off-Board Test (#756) 1 of 4
Error
Code
Test
Result
Description / Recommendation
1015 ABORT FIBER-LK: This test cot run because the fiber link has not been busied
out. Busyout the fiber link with busyout fiber-link F P, then enter
test fiber-link F P long.
SNI-BD: The test cot run because the SNI circuit pack has not been
busied out. Enter busyout board location to busyout the SNI
circuit pack, then enter test board location long.
1415
1416
ABORT The lightwave transceiver is absent from Endpoint 1 of the fiber link.
The lightwave transceiver is absent from Endpoint 2 of the fiber link.
1. If a lightwave transceiver should not be present, do nothing. For
example, an SNI connected to a DS1 converter circuit pack or an
SNI with a metallic connection does not have a lightwave
transceiver. This test can only be run when a lightwave transceiver
exists.
2. Enter list fiber-link to display fiber link endpoints.
3. Check the lightwave transceiver connections.
4. Replace the lightwave transceiver. If a fiber out-of-frame condition
exists and lightwave transceivers are used, check that the lightwave
transceivers are of the same type (both are 9823a or both are
9823b). If they are not the same type, replace one of the lightwave
transceivers:
● 9823a is used for distances up to 4900 feet.
● 9823b is used for distances up to 25,000 feet.
5. Replace the SNI circuit pack.
1450 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 4