Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
ASAI-EPT (ASAI Endpoint)
The TN800 is a PC-based platform that allows interaction of multiple applications with
Communication Manager at any time. Communication Manager (native mode) supports
emulation of three types of port MOs on this board. The type of ports to be emulated is defined
by the applications running on the TN800.
Note: If
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
ASAI-EPT MAJ1 test station extension ASAI-Adjunct
1. The alarm level for ASAI adjuncts is administered using set options. The alarm level can be set
independently for on- and off-board alarms to WARNING, MINOR, or MAJOR for every ASAI
adjunct in the system.
Note:
the TN800 is emulating BRI, the software/firmware supports up to 12 ports, but
only 8 of the 12 ports can be administered at any one time.
Error log entries and recommended actions
Table 25: ASAI-EPT Error Log Entries 1 of 2
Error
Type
Aux
Data
Associated Test Alarm
Level
ASAI-EPT
On/ Off
Board
Recommended action
0 (a) 0 Any Any Any test ASAI-ADJ
2 (b) 2-102 None
257 (c) Any BRI Layer 3 query MAJ
WRN 1
OFF test station ext r 2
test data-module ext r 2
351 (d) 0 none WRN OFF busyout and release station
513 (e) 0 None
769 (f) 0 None MAJ OFF
2562-
2566 (g)
0 None
2567 (h) 0 None
2568 (i) 0 None
3329 (j) Any Signaling Link status (#626) MAJ
WRN†
104 Maintenance Alarms for Communication Manager, Media Gateways and Servers
OFF
1 of 2