Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
● CARR-POW (Carrier Power Supply)
● DC-POWER (Single-Carrier Cabinet Environment)
● EMG-XFER (Emergency Transfer)
● EXT-DEV (External Device Alarm)
● POWER
● POW-SUP (Power Supply)
● RING-GEN (Analog Ring Generator)
● RMC-ENV (Power/Fan Sensors)
● SER-BUS (Serial Communication Bus)
Table 328: Ring Generator Query Test (#118) 1 of 4
Error
Code
1
1000
1001
1003
1115
2012
2100
Test
Result
Description / Recommendation
ABORT Could not seize the resources to run the test. Other maintenance is
running on the active Tone-Clock circuit pack.
1. Wait for the green LED on the active Tone-Clock circuit pack to go
out.
2. Enter status port-network to determine the active Tone-Clock
circuit pack.
3. Rerun the test. If the test aborts again, see TDM-CLK (TDM Bus
Clock).
2000 ABORT Response from the test was not received within the time allowed.
1. Look for TDM-CLK (TDM Bus Clock) errors and alarms. Resolve
every Tone-Clock problem first.
2. Rerun the test.
1210 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 4