Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 368: Link Retry Test (#215) 2 of 2
Error
Code
Test
Result
Description / Recommendation
1010 ABORT The link has been busied out and is out-of-service.
PMS-LINK:
1. Enter release pms-link to release the PMS Link.
2. Enter test pms-link long to rerun the test.
PMS-PRNT, JNL-PRNT:
1. Enter release journal wakeup-log or release journal
pms-log to release the link from the busyout state.
2. Enter test journal wakeup-log long or test journal
pms-log long to rerun the test.
CDR-LNK, PRI-CDR, SEC-CDR:
1. Enter release cdr-link primary or release cdr-link
secondary to release the CDR link from the busyout state.
2. Enter test cdr-link primary long or test cdr-link
secondary long to rerun the test.
SYS-PRNT:
1. Enter release sp-link to release the System Printer Link from
the busyout state.
2. Enter test sp-link long to rerun the test.
2012 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
FAIL The link cot be established.
1. See Procedures for Restoring the System Printer Link for
instructions.
PASS The output device link is up.
1300 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2