Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
See test analog-testcall in the Maintenance Commands for Avaya Aura Communication
Manager, Media Gateways and Servers (03-300431) for the command syntax. The command
options and the associated tests which are executed for test analog-testcall are:
Test Command Option Test executed
test analog-testcall supervision 844
test analog-testcall full 845
test analog-testcall no-selftest 846
test analog-testcall no-return-loss 847
test analog-testcall no-st-or-rl 848
These tests run on CO-TRK (Analog CO Trunk) and TIE-TRK (Analog Tie Trunk).
Table 457: Automatic Transmission Test (#844-848) 1 of 5
Error
Code
Test
Result
Description / Recommendation
1000 ABORT System resources required to run this test are not available. The port
may be busy with a valid call.
1. Enter display port location to determine the trunk group/
member number of the port.
2. Enter status trunk to determine the service state of the port. If
the service state indicates that the port is in use, wait until the port is
idle before retesting.
3. Retry the command at 1-minute intervals up to 5 times.
1001 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1520 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 5