Demand test descriptions and error codes - Avaya Support

Table 125: Aux Data for Error Type 258 6 of 6
Aux Data Description of Failure
22 Failed to send image name message to the source board
FW-DWNLD (Firmware Download)
23 No response to image name message from the source board
24 Downlink for file retrieval failed to the source board
25 Source board did not respond to file retrieval message
26 Downlink for IP address failed
1. Retry the download command.
2. If the error recurs, escalate the problem.
27 Attempt to store download data failed. This is a system error.
1. Check for system-wide errors.
2. Retry the download command.
3. If the error recurs, escalate the problem.
c. Error Type 259 — problem on the target board. To resolve the error, use the command
test firmware download. The Aux Data specifies the error. See Table 126: Aux Data
for Error Type 259 for more details.
Table 126: Aux Data for Error Type 259 1 of 3
Aux Data Description of Failure
1 Target board is not present or not responding.
1. Check board’s location and translations.
2. Retry the download.
2 Incorrect target board for download schedule.
1. Verify board’s location and download schedule.
2. Retry the download.
3 Target failed to go into Download Mode.
1. Retry the download.
4 Target received bad file header.
1. Get a new image.
2. Retry download.
6 of 6
1 of 3
Issue 5 May 2009 475