Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Error log entries and recommended actions
Table 13: ADX16A-P Error Log Entries
Error
Type
0 1
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended action
0 Any Any Any test port location
1 (a) 40977 None
18 0 busyout
station ext
WRN ON release station extension
23 (b) 0 None WRN OFF
130
(c)
257
(d)
513
(e)
1025
(f)
40973 None
Any None
None WRN ON test port location
Looparound Test
(#161)
1281 Conference Circuit
Test (#7)
1537 NPE Crosstalk Test
(#6)
MIN
WRN 2
ON test port location l r 2
MIN ON test port location l r 2
WRN2 MIN ON test port location l r 2
2 WRN
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each
appropriate test’s description, and follow its recommended procedures.
2. Minor alarms on this MO may be downgraded to Warning alarms based on the values used in set options.
Notes:
a. Error Type 1 is an inline error that can only be resolved over time. No terminal equipment
was present when ringing was attempted. Execute test port location
b. Error Type 23: The circuit pack was logically administered but not physically installed. The
alarm will clear when the circuit pack is installed.
c. Error Type 130: The circuit pack was removed or has been insane for more than
11 minutes. To clear the error, reseat or replace the circuit pack.
60 Maintenance Alarms for Communication Manager, Media Gateways and Servers