Demand test descriptions and error codes - Avaya Support

Table 291: Digital Station Audits Test (#17) 2 of 4
Error
Code
Test
Result
Description / Recommendation
Digital Station Audits Test (#17)
3 ABORT The EPF has detected an overcurrent condition
DIG-LINE:
1. For a TN754 vintage 13 or earlier Digital Line circuit pack, enter
test port location long.
● If Test #11 passes, the EPF condition was cleared. Rerun the
short test sequence.
● If Test #11 does not pass, follow the repair procedures for
Digital Line Electronic Power Feed Test (#11)
2. Look for Error Type 769 logged against DIG-LINE and follow the
procedures for DIG-LINE (Digital Line).
3. Rerun the test.
RDIG-STA:
1. Enter test port location long.
● If Test #11 passes, the EPF condition was cleared. Rerun the
short test sequence.
● If Test #11 does not pass, follow the repair procedures for
Digital Line Electronic Power Feed Test (#11).
2. Look for Error Type 769 logged against RDIG-STA and follow the
procedures for RC-BD (Radio Controller Board).
3. Rerun the test.
4 ABORT Internal system error
1. Resolve any outstanding circuit pack or media module maintenance
problems.
2. Retry the command at 1-minute intervals up to 5 times.
2 of 4
Issue 5 May 2009 1119