Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 405: LANBIC Receive Parity Error Counter Test (#595) 2 of 2
Error
Code
Test
Result
Description / Recommendation
1–10 FAIL The circuit pack detected parity errors. The error code indicates the value
of the on-board error counter.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to fail, run the Packet Interface Test (#598) with
test board location long
3. If the Packet Interface Test (#598) fails, see Packet Interface Test
(#598) for the repair procedures.
PASS No errors were detected by circuit pack.
Receive FIFO Overflow Error Counter Test (#596)
When the TN799 C-LAN or TN2501 VAL circuit pack detects packet bus buffer overflow, it
increments the error on its FIFO Overflow error counter. This test reads and clears the counter.
This test runs on CLAN-BD (Control LAN Circuit Pack) and VAL-BD (Voice announcements
over LAN Circuit Pack).
1384 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2