Demand test descriptions and error codes - Avaya Support

2. From the Maintenance Web Interface pages of the ESS server that is not connecting,
initiate a PING to the administered IPSIs to verify connectivity between the ESS server
and IPSIs.
3. Firewalls or other security measures may prevent the server and IPSI from
communicating. Verify that these ports are open through the network between the
server and the IPSI:
● 5010 IPSI / Server control chel
● 5011 IPSI / Server IPSI version chel
● 5012 IPSI / Server serial number chel
4. Use status ess port-network to identify which ESS Cluster IDs a Port Network
(IPSI) is connected to. This command may be executed on either a Main server or
ESS. With a fragmented network, it may be necessary to execute this command on
each server in the system configuration to acquire a complete view of IPSI
connectivity. Figure 24: status ess port-networks example shows an IPSI (the standby
IPSI in PN 2) that does not have a connection established with the server.
Figure 24: status ess port-networks example
status ess port-networks
Cluster ID 1 ESS PORT NETWORK INFORMATION
Port IPSI Pri/ Pri/ Cntl Connected
Com Intf Intf Ntwk Gtway Sec Sec Clus Clus(ter)
PN Num Loc Type Ste Loc Loc State ID IDs
1 1 1B01 IPSI up 1B01 1AXX standby 1 1 44 64 13 9 200 100 500
1B01 actv-aa 1 1 44 64 13 9 200 100 500
2 1 2AXX IPSI up 2AXX 2AXX actv-aa 1 1 44 64 13 9 200 100 500
2B01 standby * * 44 64 13 9 200 100 500
3 2 3AXX IPSI up 3AXX 3AXX actv-aa 1 1 44 64 13 100 500 850 9
3B01 standby 1 1 44 64 13 100 500 850 9
4 2 4A01 IPSI up 4A01 4A01 actv-aa 1 1 44 64 13 100 500 850 9
4B01 standby 1 1 44 64 13 100 500 850 9
5 1 5A01 EI up 3AXX
Command successfully completed
Command:
5. Resolve network fragmentation and outage issues per local practice.
6. Enter the SAT command status ess port-network to verify that all Port
Networks (IPSIs) are communicating with servers.
416 Maintenance Alarms for Communication Manager, Media Gateways and Servers