Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
ATM-TRK-related commands
Table 53: ATM CES troubleshooting commands lists some commands that can be useful in
troubleshooting ATM errors and alarms.
Table 53: ATM CES troubleshooting commands
Command Description
display circuit-packs cabinet Shows the circuit packs in the cabinet,
identifying ATM trunk as well as ATM-EI
boards. “ATM Interface” boards have not been
administered as CES or PNC.
display atm ports location Shows the 256 ports on the ATM board with
the corresponding signaling and trunk group.
list configuration atm Lists the ATM boards, identifying equipment
location, board code, type, and vintage.
list configuration trunks Lists boards identifying assigned ports. While
the ATM board is listed, the 256 ports are not.
busyout/release atm
signaling-group
Error log entries and recommended actions
Busyout or release of an ATM signaling group
within a trunk group.
status atm signaling-group Show current status of an ATM signaling
group.
status trunk-group Shows status of the trunk group (ATM
signaling groups are part of trunk groups).
Table 54: ATM-TRK Error Log entries 1 of 3
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended Action
0 0 Any Any test board location
1(a) None MIN ON
186 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 3