Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 400: Maintenance/Test Circuit Pack Query Test (#572) 3 of 3
Error
Code
Test
Result
Description / Recommendation
xyzz FAIL The Maintenance/Test packet bus port has detected faults on the Packet
Bus. The Error Codes are interpreted as follows:
1yzz - The Maintenance/Test packet bus port has reconfigured the packet
bus around the faulty leads. This action only occurs in a high- or
critical-reliability system (duplicated PNC).
2yzz - The Maintenance/Test packet bus port is unable to correct every
Packet Bus fault it has detected.
x0zz - None of the packet bus faults are open faults.
x1zz - At least some of the packet bus faults are open faults. Look for
Error Type 2305 in the Error Log. The Aux Data value indicates the
number of open leads.
xyzz - The last two digits of the Error Code indicate the total number of
faulty packet bus leads detected.
Examples:
Packet Circuit Pack Audit Test (#573)
Error Code 2003 FAIL: The Maintenance/Test packet bus port has
detected 3 faulty leads. None of them are opens. At least one was
unable to be corrected.
Error Code 1103 FAIL: The Maintenance/Test Packet Port has
detected 3 faulty leads. At least one is an open. The Maintenance/
Test circuit pack was able to correct all of them by reconfigured.
See Isolating and repairing packet-bus faults in Maintenance Procedures
for Avaya Aura Communication Manager, Media Gateways and Servers
(03-300432)
PASS No faults have been detected on the packet bus by the Maintenance/Test
circuit pack. The packet bus is operating correctly.
This test determines whether Packet circuit packs have reported Packet Bus-related inline
errors within the last minute. If so, the failure code indicates whether one or more than one
circuit pack has reported such failures.
1372 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 3