Demand test descriptions and error codes - Avaya Support

Steps Comments
Enter change circuit-packs
cabinet #. Update the screen to
show that TN1654 boards are now
being used instead of TN574 boards.
Also update the connected SNI, if
applicable, to suffix B.
Enter add fiber-link fiber# to
re-add the fiber-link using TN1654 DS1
converter circuit packs.
Enter test alarms long clear
for category exp-intf.
Wait 5 minutes for SNI-BD, FIBER-LK
AND DS1C-BD alarms to clear, or
enter clear firmware-counters
a-pnc
Cabinet # represents the cabinet associated with a
DS1 converter board. The change circuit-packs
screen needs to be updated for both DS1 converter
boards. Also, if needed, re-add translations for
connected EI boards.
Fiber# represents the fiber-link number associated
with the TN574 DS1 converter complex that is being
upgraded to a TN1654 DS1 converter complex
382 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2