Demand test descriptions and error codes - Avaya Support

Table 40: Error codes and Aux Data values ATM-NTWK 6 of 6
Cause
Code/
Error
Type
257 to
300 (b)
Aux
Data
Cause Codes Description
ATM-NTWK (ATM Network Error)
(b) ATM Impaired Paths
1. Examine the error log (display errors), atm setup-events log
(list measurements atm svc-setup), and atm pnc-latency
(list measurements atm latency) screens to help diagnose
the problem, although the switch could be operating normally. In this
case, you should consider raising the Activation threshold and/or
increasing the Timeout value on the ATM-RELATED System
Parameters screen. (change system atm).
Enter list measurements atm svc-setup to see information
about errors associated with connection numbers.
2. After entering the above command, note the time stamps shown in
the list measurements atm setup-events screen. Execute
the above command periodically and note the time stamps. If the
time stamps have changed for a particular From Conn-To Conn pair,
this indicates there are still setup failures/delays for that connection.
3. After verifying that every associated ATM endpoint is operating
correctly, and if errors are still occurring, contact your local service
provider.
301 (c) ANY System wide ATM Impaired Paths.
See the suggestions listed above to trouble shoot these errors.
769 (d) ATM CLP (Cell Loss Priority) Bit Errors
1025 (e) ATM Congestion Bit Errors
1281 (f) ATM Cell Underrun Errors
1537 (g) ATM Cell Overrun Errors
1793 (h) ATM Lost Cells
6 of 6
Issue 5 May 2009 153