Demand test descriptions and error codes - Avaya Support

An example of the output of the list ipserver-interface command is:
list ipserver-interface
IPSV-CTL (IP Server Interface Control)
The State of Health information contains the fault class information in the far right columns as
follows:
● C = Clock
● P = Packet Interface
● E = Expansion Archangel Link
● G = Tone Generation
IP SERVER INTERFACE INFORMATION
Port Pri/ Primary/ Primary/ Primary/ State Of
Ntwk Sec Secondary Secondary Secondary Serv Control Health
Num Bd Loc IP Address Host Name DHCP ID State State C P E G
---- ------ --------------- ---------------- --------- ----- ------- -------
2 2A01 172.18.18.181 172.18.18.181 ipsi-A02a IN actv-aa 0.0.0.0
3 3A02 172.18.18.182 172.18.18.182 ipsi-A03a IN actv-aa 0.0.0.0
8 8A02 192.168.18.40 192.168.18.40 ipsi-A08a IN actv-aa 0.0.0.0
15 15A02 172.18.18.34 172.18.18.34 ipsi-A15a IN actv-aa 0.0.0.0
45 45A02 172.17.17.60 172.17.17.60 ipsi-A45a IN actv-aa 0.0.0.0
51 51A02 172.18.18.81 172.18.18.81 ipsi-A51a IN actv-aa 0.0.0.0
Issue 5 May 2009 535