Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Aux Data Description
7 Transmit Network Processor (TNP) failure
8 MEMORY read/write failure
1. If the system has duplicated PNC:
a. Test the ATM-EI (test board location l).
b. If Error 3585 is detected again, or if the board is not recognized anymore, replace
the ATM-EI circuit pack.
2. If the system does not have duplicated PNC and the circuit pack is in a PN:
a. Replace the ATM-EI circuit pack.
Error Type 3586: Framer Looparound test (#1260) failed.
Aux Data (Error Code 3586 only):
Aux Data Description
2 Packet path failed
3 Circuit path failed
4 TDM loop cot be created
5 Packet loop cot be created
3. If Error Type 3586 is detected again, replace the circuit pack.
v. Error Type 3841: The board received a message from the switch that it does not recognize,
and the board responded with an inconsistent down link error message. This error does not
affect service, and no action is required.
w. Error Type 3842: The circuit pack received data from the packet bus faster than it could
distribute the data to its endpoint. This circuit pack should be able to recover by itself, and
no action is necessary.
x. Error Type 3843: The firmware on the circuit pack is reporting a resource that is low. This
error does not affect service and no action is required.
142 Maintenance Alarms for Communication Manager, Media Gateways and Servers